Download and 3D print this part to add face tracking to the the Lynx-R1 (requires the use of an extension kit).
Released 28 days ago
The face tracker module add-on allows you to mount a Project Babble module on the Lynx-R1
You must flash the ESP32S3 module with OpenIris and use the Babble PC software.
Prerequisites :
In this release :
Project Babble module : https://www.printables.com/model/930196-seeed-studio-esp32s3-project-babble-mount-universa
Seeed Studio XIAO ESP32S3 Sense : https://wiki.seeedstudio.com/xiao_esp32s3_getting_started/
ESP32S3 flashing tool : https://github.com/EyeTrackVR/FirmwareFlashingTool
Babble PC software : https://docs.babble.diy/docs/software
License CC By 4.0 Attribution 4.0 International
You are free to:
Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
https://creativecommons.org/licenses/by/4.0/
MD5 checksum: 66e6e57adbbd676aded21a3d48b21838