Battery Indicator

You are viewing an older version of this document (Version 1). The latest is Version 10.

Last updated: 11 months ago • 10 versions | Visibility: Public

Battery Indicator :

This page is under construction, information may be incorrect.

When the Lynx-R1 is not charging, so when the Lynx-R1 is in use; With a battery at :

If the Lynx-R1 doesn't boot, there is 2 use case about the LED :

If the LED is blinking at a regular interval, this means the Lynx is way too low battery to boot-up
There is a specific icon displayed between the 2 screen (we will update later)
If the LED is blinking at irregular intervals, this means the Lynx has a hardware issue (don't worry, this has not happened yet
There is a specific icon displayed between the 2 screen (we will update later)

We will add a charging mode with the V1.1.7, meanwhile to charge the Lynx-R1 :

Cable : It's seems to have an issue with the cable provided with the box, so please use another trusted cable.
Charger Protocole : Lynx-R1 is compatible with QC2, QC3 and PowerDelivery (in theory). We recommand to use a PowerDelivery Charger. Because we had the best result with a 20W PD charger. (We have not tested with any higher Watt)
How to charge with V1.1.6 ? :
1/ Boot the Lynx-R1 to the LynxLauncher
2/ use the Power BUTTON to turn-off the screen !
3/ Wait for a long time

Don't worry, we will add a charger screen with the next version.

(We have not tested this, we have started a process to get some certification). Theorically the Lynx-R1 is compatible with :

PowerDelivery seems to be the more efficient.