Getting Started

You are viewing an older version of this document (Version 12). The latest is Version 23.

Last updated: 7 months ago • 23 versions | Visibility: Public

What's in the box?

The Lynx-R1 packaging

The Lynx-R1 packaging contains the headset as well as a set of accessories listed below:

Magnetic Back and Forehead foams (already mounted)
Magnetic Light Blocker face foam
Overhead strap
USB-C cable

The magnetic Light Blocker face foam has been designed to provide full immersion when using VR apps. It is compatible with most pairs of glasses.

Note : we recommend removing the Light Blocker foam to users prone to cybersickness as the peripheral vision will alleviate most of the effect

The overhead strap is optional, it provides additional comfort when wearing the Lynx for extended periods of time.

The USB-C cable is 90° titled in order to be able to use the flip-up functionnality even when plugged in.

Lynx-R1 buttons, sensors and connector

Front view of the Lynx-R1

Internal view of the Lynx-R1

Functionalities

Power Cycle:

Pressing the Power button for 2 seconds will turn the device on and off
Pressing the Power button and the Volume + button for ~30 seconds to recover the device if the battery was completely depleted
Pressing the Power button shortly puts the device in Standby mode. The Standby mode will turn off the displays and pause some high-compute services. This mode is also triggered when the proximity sensor detects that the headset is not worn

IPD Adjustment

Each of the two lenses of the headset can be moved independently to adjust the IPD, the range is 56 to 76mm.

The Lynx-R1 lens is a unique prism that will require an IPD adjustment in order to find the sweet spot. In case of misalignment (when the user's eyes do not match the lenses positions), please follow these recommendation:

In case of a vertical misalignment, adjust the IPD setting of the lens(es)
In case of a horizontal misalignment, adjust the tilt of the front module by slightly moving it up or down

Eye Relief adjustment

The flip-up and translation mechanism

The front module of the Lynx-R1 can be flipped-up completely to get back to the real world without having to take off the headset.

It is also possible to adjust the distance between the front module module and the face, this can be particularly useful to adjust when wearing glasses.

To adjust the distance, press the central button on the top of the headset to unlock the mechanism and pull the front module away or closer to the strap.

VR mode

We recommend to use the Light Blocker foam when using a VR-only app to increase immersion. Simply clip on the Light Blocker foam to the front module with the magnets.

We advise to remove the face foam when using Mixed Reality apps as the real world in the peripheral vision aligns with the field of view of the headset almost perfectly. This helps proprioception and enhance the Mixed Reality experience.

Troubleshooting

When encountering an issue with the device, please follow the recommendations below:

In any case, do not try to open the device, especially the front module. Each headset goes through a complete calibration process for its cameras, IMU and gyroscope after manufacturing. If these components move slightly, the calibration may become invalid which will likely result in poor 6DoF tracking (hand-tracking may also stop working).

For any issue with the device, please refer to the Support section. The Help! forum is a space where the topics are only visible by the user and our team.

As our bootloader is open, if you flashed something exotic on your device or tampered with the system data, you should be able to restore your device and your calibration files can be downloaded again through this website.